Cameras of heat and cold of KTH

amer of heat and cold - KTH is intended for test of samples of concrete, solution, crushed stone, a brick for frost resistance, in accordance with GOST 10060-95, GOST 8269.0-97, GOST 5802-86, and also for tests of any materials for frost resistance, within the technical characteristics.

The camera of heat and cold - KTH can be used in construction and road laboratories, research and educational institutions.

The camera of heat and cold - KTH is calculated for work in the enclosed space at air temperature not below +5 °C and relative humidity to 80%, in the inexplosive environment which is not containing salt fogs, conducting dust, aggressive gases or vapors destroying metal and isolation with an atmospheric pressure 84... 106,7 kPa. Technical characteristics

Regulation and maintenance of temperature - automatic (controller).

Possibility of cyclic work on the set program.

Material of the working camera - stainless steel.

Execution - a case or a chest.

Range of the maintained temperatures in the working camera, from-50 to +60 °C.

Unevenness of temperature on camera volume: ±2 °C.

Step of installation of temperature, 1 °C.

Time of an exit to min the set camera temperature (with full load) - no more than 2,5 hours.

Way of cooling of the compressor - air.

Power supply - 380 Century.

Parameters:

Cameras of heat and cold of KTH are delivered with the protocol of primary certification.