Test press for formation and tests of asphalt concrete samples of IP-1A-500 AB "Station wagon
- Customer pickup,
- Courier
- In detail
- Country of manufactureRussia
APPOINTMENT
Production of asphalt concrete samples - by consolidation of asphalt concrete mixes in accordance with GOST 12801-98 in forms with a diameter of 50,5 mm, 71,4 mm and 101,0 mm;
Definition of strength of asphalt concrete samples at compression at a speed of the movement of a plate of a press (3,0±0,3) mm/min. in accordance with GOST 12801-98;
Definition of strength of asphalt concrete samples on stretching at split from the set constant of speed of the movement of a plate of a press (3,0±0,3) or (50±1) mm/min. in accordance with GOST 12801-98;
Definition of strength of asphalt concrete samples on stretching at a bend and deformativnost indicators in accordance with GOST 12801-98;
Definition of characteristics of a sdvigoustoychivost of asphalt concrete samples (according to Marshall scheme) in accordance with GOST 12801-98;
Extraction (vypressovka) of asphalt concrete samples hydraulic release adaptation;
Definition of a drobimost of crushed stone (gravel) of GOST 8269.0-97.
Tests of mineral powder in accordance with GOST 52129-2003.
Description.
The test laboratory press like IP-1A-500AB "Station wagon" can be applied in construction and road laboratories, research and educational institutions.
Distinctive feature of a press like IP-1A-500AB "Station wagon" is performance of all technological operations necessary for production and tests of asphalt concrete samples
TECHNICAL CHARACTERISTICS:
Parameters | Measurement unit. | Value |
Diameter of forms and the established loading | ||
Diameter is 50,5 mm | kN | 80,1 |
Diameter is 71,4 mm | kN | 160,2 |
Diameter is 101,0 mm | kN | 320,4 |
Speed of the movement of a plunger without loading | mm/min. | 80 |
Time of deduction of pressure | mines | 3±0,1 |
Time of an exit to the set pressure | sec. | 5... 10 |
Range of the measured loading | kN | 100... 500 1,0... 100 |
The fixed speeds of movement of the lower plate (automatic maintenance) | ||
Test | mm/min. | 50±1 |
Test | mm/min. | 3,0±0,1 |
Molding/extraction | mm/min. | 40 |
The accelerated course | mm/min. | 80 |
Error of measurement of loading | % | no more than 1 from the measured loading |
Diameter of the support plate | mm | 115 |
Height of working space | mm | 360 |
Width of working space | mm | 330 |
Overall dimensions (SHKHGKHV) | mm | 540х550х1700 |
Weight | kg | 450 |
Power supply | В / Hz | 220 / 50 |
The recommended service conditions | ||
air temperature | °C | +10... +30 |
relative humidity | % | 40... 80 |
DELIVERY SET:
Name | Measurement unit. | Quantity |
Station wagon IP-1A-500AB car | piece | 1 |
Microprocessor control unit | piece | 1 |
Pro-rate of 50 mm | piece | 4 |
Device for centering of the LO-257 forms | piece | 1 |
Set of the LO-257 forms | piece | 1 |
Adaptation for definition of characteristics of a sdvigoustoychivost of asphalt concrete samples (according to Marshall scheme) | piece | 1 |
The device for test on a bend | piece | 1 |
Passport | piece | 1 |
Technical specification | piece | 1 |
Certificate of checking | piece | 1 |