Finishing of jersey

The location of finishing lines, decorative finishings, their quantity and distance between them, establish color of threads on model to a sample).

Finishing lines. Cuts or edges of products can be trimmed by decorative and finishing and regional lines in the form of scallops, air loops of "cockleshells", etc. When making a line at the edges of a detail apply the directing rulers or pads-napraviteli. When finishing by lines in the middle of a detail the first line is carried out on the planned line, by the subsequent — by means of a pad-napravitelya.

The decorative line by ploskoshovny cars is laid on front or seamy side of a knitted product, in petlitel of the car threads from chemical fibers can be used (type krimplen or an elastic).

Finishing by a band, an inlay, a soutache, a vyyunchik, etc. of Nastrachivaniye of the first row of finishings make in the area of a marking or at a certain distance from edge of a knitted product. Finishings of the subsequent ranks nastrachivat by means of a pad-napravitelya.

Kroyeny inlays nastrachivat on a detail of products in two steps: the inlay is imposed on a wrong side on the planned lines or notches the faces inside and nastrachivat. Width of a seam is 0,5-0,7 cm. Then the inlay is unbent face up, cuts turn in on 0,5-0,7 cm and nastrachivat. A line lay at distance 0,1-0,2 cm from the turned-in edge or according to model.

The inlay with the earned edges (band) up to 1,5 cm wide is connected to a product in one step.

Okantovyvaniye of cuts can be executed by an inlay, a band, a tape at the same time two inlays, an inlay and a band, an inlay and lace and the picked-up materials on model. In a fringing the band (elastic) according to model can be laid.

Okantovyvaniye of cuts or edges of details carry out without podgib or from podgiby two or one cuts or edges of a fringing. Width of a seam is established on model.