The stationary screw compressor with the frequency converter the direct DL-13/8-GF drive
- Customer pickup,
- Courier
- In detail
- BrandTERSUS
- Country of manufactureKazakhstan
The stationary screw compressor with the frequency converter the direct DL-13/8-GF drive
The compressor Dali installations are equipped with the built-in automatic system of regulation of frequency of rotation of the electric motor that allows to achieve considerable economy of the electric power.
By consideration of a question of acquisition of the new equipment it is important to pay attention not only to initial investments, but also to the cost of operation of screw compressors. The most part of expenses of compressor installations of various productivity is made by costs of the electric power. Buying the Dali compressor with the frequency converter, you save up to 35% of the electric power. The converter regulates the speed of rotation of the electric motor, it allows to spend the electric power only for production of necessary amount of compressed air. Thanks to it electricity consumption on production significantly decreases, allowing to pay back for the short term not only a difference in equipment costs, but also cost of the compressor. High reliability, smooth, controlled acceleration and delay reduces loading of mechanical and electric elements. Smooth changes of value of current, tension and frequency. The frequency drive allows: To avoid the standard mode "work-the single course stop", having reduced electricity consumption in the unproductive mode of idling. Saving over 30%, depending on an operating mode. To lower load of the power supply network of the enterprise, starting currents do not exceed working parameters. To increase a compressor resource due to work of compressor installation with the lowered rotation frequency.
Screw compressors with the frequency converter (the direct drive)
G - the direct drive, F - with the frequency converter
Model |
Working pressure, atm |
Make - telnost, m ³ / mines |
Power e.d., kW |
Size of an output branch pipe |
Weight, kg |
Dimensions, mm |
DL-3.0/8GF | 8 | 3 | 18.5 | G1 | 600 | 1200х880х1550 |
DL-3.6/8GF | 8 | 3.6 | 22 | G1 | 650 | 1200х880х1550 |
DL-6.0/8GF | 8 | 6 | 37 | G1 | 1050 | 1300х1100х1660 |
DL-7.5/8GF | 8 | 7.5 | 45 | G1 | 1150 | 1300х1100х1660 |
DL-10.5/8-GF | 8 | 10.5 | 55 | G1 | 1650 | 1630х1280х1790 |
DL-13/8-GF | 8 | 13 | 75 | G1 | 1800 | 2240х1160х1620 |
DL-12/10-GF | 10 | 12 | 75 | G1 | 1800 | 2240х1160х1620 |
DL-12/13-GF | 13 | 12 | 90 | G1 | 1900 | 2560х1300х1620 |
DL-16/8-GF | 8 | 16 | 90 | G1 | 1900 | 2560х1300х1620 |
DL-14/10-GF | 10 | 14 | 90 | G1 | 1900 | 2560х1300х1620 |
DL-20/8-GF | 8 | 20 | 110 | G1 | 2400 | 2760х1340х1710 |
Dl-16/10-GF | 10 | 16 | 110 | G1 | 2400 | 2760х1340х1710 |
DL-14/13-GF | 13 | 14 | 110 | G1 | 2400 | 2760х1340х1710 |
DL-22/8-GF | 8 | 22 | 132 | G1 | 2500 | 2760х1340х1700 |
DL-16/13-GF | 13 | 16 | 132 | G1 | 1710 | 2760х1340х1700 |
DL-20/10-GF | 10 | 20 | 132 | G11/4 | 2500 | 2760х1340х1710 |
DL-27/8-GF | 8 | 27 | 160 | G11/4 | 3000 | 2860х1640х1800 |
DL-23/10-GF | 10 | 23 | 160 | G11/4 | 3000 | 2860х1640х1800 |
DL-20/13-GF | 13 | 20 | 160 | G11/4 | 3000 | 2860х1640х1800 |
DL-21/13-GF | 13 | 21 | 185 | G11/4 | 3200 | 2860х1640х1800 |
DL-30/8-GF | 8 | 30 | 185 | G11/4 | 3200 | 2860х1640х1800 |
DL-2.7/13-GF | 13 | 27 | 200 | G11/4 | 3800 | 2860х1640х1800 |
DL-6.9/10-GF | 10 | 6.9 | 55 | G11/4 | 3800 | 2000х1000х1300 |
DL-6.0/13-RF | 13 | 6 | 55 | G11/4 | 3800 | 1630х1280х1790 |
DL-10/8-RF | 8 | 10 | 55 | G11/4 | 3800 | 1630х1280х1790 |
DL-8.7/10-RF | 10 | 8.7 | 55 | G11/4 | 3800 | 1630х1280х1790 |
DL-7.5/13-RF | 13 | 7.5 | 55 | G11/2 | 1600 | 1630х1280х1790 |
DL-13/8-RF | 8 | 13 | 75 | G2 | 1800 | 2440х1160х1620 |
DL-12/10-RF | 10 | 12 | 75 | G2 | 1800 | 2440х1160х1620 |
DL-10/13-RF | 13 | 10 | 75 | G2 | 1800 | 2440х1160х1620 |